The following instructions outline how to setup a Ruckus Unleashed network for the Marketing4WiFi Platform. This guide covers details such as configuring RADIUS, walled garden entries, and captive portals. This guide assumes that your Unleashed equipment is already operational and on a live network with adopted Access Points. Please make sure any firewall rules, web content filters, and other security measures have been configured to interface with the platform.
- Select the Admin & Services tab. Open the Services menu and click AAA Servers.
You will need to create two AAA servers.
Name: AUTH
Type: RADIUS
Auth Method: PAP
Backup Radius: Enabled
First Server:
IP Address: Select one
Port: 1812
Shared Secret: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
Confirm Secret: as above
Second Server:
IP Address: Select one
Port: 1812
Shared Secret: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
Confirm Secret: as above
Name: ACCT
Type: RADIUS Accounting
Backup Radius: Enabled
First Server:
IP Address: Select one
Port: 1813
Shared Secret: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
Confirm Secret: as above
Second Server:
IP Address: Select one
Port: 1813
Shared Secret: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
Confirm Secret: as above
- Select the WiFi Networks tab and click Create to create a new Wlan.
Name: This will be the SSID presented to your guests
Usage Type: Hotspot Service
Hotspot Services: Click Create New - Configure the Captive Portal.
WiSPr Support: None
Name: This is the name for the hotspot services profile
Login Page: Select one
Redirect URL: Select one
Session Timeout: Checked
Grace Period: Checked - Configure Authentication
Authentication Server: AUTH
Accounting Server: ACCT
Isolate Wireless client traffic from other clients on the AP: Enabled
- Configure Walled Garden: Please add all the Default walled garden entries.
- Save the Hotspot Services configuration by hitting “OK” to the Create New pop up.
- Save the WLAN settings.
- Final Step
To complete the set up you will need to SSH in to the Master Unleashed Access point and type the commands below, one line at a time.enable
config
wlan “The name of your WLAN”
called-station-id-type ap-mac
end