Peplink/Pepwave Configuration Guide

The following instructions outline how to setup a Peplink/Pepwave captive portal to GoZone’s Marketing 4 WiFi platform. This guide assumes your Peplink/Pepwave device is already operational on a live network. You will need access to the Marketing 4 WiFi dashboard and admin access to the Peplink/Pepwave management portal to complete this guide. Please make sure any firewall rules, web content filters, and other security measures have been configured to interface with the platform.

Marketing 4 WiFi Dashboard Setup

Adding Gateways to your Hotspot

The MAC of every access point that broadcasts the Guest WiFi must be added to your hotspot.

  1. Login to your Marketing 4 WiFi dashboard
  2. Using the navigation panel to the left, select Network> Gateways
  3. Click the Add Gateway option to the top right
    1. Select Hotspot: Select your desired hotspot
    2. Gateway Name: Enter a name for this Gateway(s)
    3. Gateway Type: Peplink
    4. MAC Address: Enter the MAC Address of your AP. (use the blue + icon to the right to add multiple AP MACs at once)
  4. Press Submit
  5. Using the navigation panel to the left, select Network> Hotspots
  6. Click the blue Edit icon next to the hotspot you selected in step 3.1
    • Scroll down to the option that says ‘OpenWiFi AP Roaming’ and turn it ON
    • Press Submit
  7. This completes the Gateway creation portion of this guide

Confirming Platform Details

To complete the hardware configuration  you must obtain details unique to your Operator environment and desired hotspot.

  1. Login to your Marketing 4 WiFi dashboard
  2. Using the navigation panel to the left, select Operator Settings > Operator Customizations
    1. Splash Hostname: This is your splash hostname for use later in this guide
    2. Platform Environment: Confirm your environment and then select the correct RADIUS Servers for your environment from the options below for use later in this guide
      US-A RADIUS Servers
      • Primary Server: 52.23.46.139
      • Secondary Server: 52.207.192.243

      US-B RADIUS Servers
      • Primary Server: 3.132.31.3
      • Secondary Server: 3.18.137.68

  3. Using the navigation panel to the left, select Network > Hotspots
    1. Search for your desired hotspot
    2. Hotspot ID: This is the NAS-Identifier you will use later in this guide
    3. Secret: This is the RADIUS Secret you will use later in this guide

InControl2 Portal

  1. Login to your InControl 2 Portal and select your Organization
  2. Select your desired Group
  3. Click Network Settings at the top and then Captive Portals
  4. Click the button to Add an External Captive Portal
    • Enable: Checked
    • Name: SmartWiFi
    • Access Mode: User Authentication
    • Authentication: RADIUS Server
    • Authentication Port: 1812
    • Authentication Secret:
    • Accounting Server:
    • Accounting Port: 1813
    • Accounting Secret:
    • Profile MAC Address: LAN MAC Address
    • NAS-Identifier:
    • Daily Quota: 0 minutes 0 MB
    • Allowed Networks: Add the domain of every default walled garden entry as it’s own line to this list. You must include an entry for your branded splash page hostname!
    • Splash Page URL: Use the Splash Hostname collected in Step 2.1 of the Confirming Platform Details section of this guide and add “/hotspotlogin.php” to the end.
      Example- https://splash.4wifi.net/hotspotlogin.php
    • Press Save
  5. Click Network Settings at the top and then VLAN Networks
  6. Click your desired VLAN
    • Captive Portal: Smart WiFi
    • Press Save
  7. This completes the InControl 2 configuration

Pepwave MAX Web interface

  1. Login to your Pepwave MAX admin web interface
  2. Click AP at the top and then New SSID. Configure with-
    • SSID Settings
      • SSID: Guest WiFi(or whatever you wish)
      • VLAN: Select your desired VLAN
      • Broadcast SSID: Enabled
    • Security Settings
      • Security Policy: Open (No Encryption)
    • Click Save
  3. Click Advance at the top and then RADIUS Servers to the left.
    1. Click New Profile under the Authentication Server section. Configure with-
      • Name: SmartWiFi_Auth1
      • Host:
      • Port: 1812
      • Secret:
    2. Click New Profile under the Authentication Server section again. Configure with-
      • Name: SmartWiFi_Auth2
      • Host:
      • Port: 1812
      • Secret:
    3. Click New Profile under the Accounting Server section. Configure with-
      • Name: SmartWiFi_Acct1
      • Host:
      • Port: 1813
      • Secret:
    4. Click New Profile under the Accounting Server section again. Configure with-
      • Name: SmartWiFi_Acct2
      • Host:
      • Port: 1813
      • Secret:
  4. Click network at the top and then Captive Portal to the left. Configure with-
    • Enable: Select the VLAN you configured in step 2 for the SSID Settings
    • Access Mode: User Authentication
    • Authentication: RADIUS Server
    • Primary Server Authentication Profile: SmartWiFi_Auth1
    • Primary Server Accounting Profile: SmartWiFi_Acct1
    • Secondary Server Authentication Profile: SmartWiFi_Auth2
    • Secondary Server Accounting Profile: SmartWiFi_Acct2
    • Accounting Interim Interval: 300
    • NAS-Identifier:
    • Access Quota: 0minutes 0mb
    • Inactive Timeout: 0 minutes
    • Allowed Networks: Use the blue + Icon to add the domain of every default walled garden entry. You must include an entry for your branded splash page hostname!
    • Splash Page: Use the Splash Hostname collected in Step 2.1 of the Confirming Platform Details section of this guide and add “/hotspotlogin.php” to the end.
      Example- https://splash.4wifi.net/hotspotlogin.php
    • Click Save
  5. Use the Apply Changes at the top right to deploy the changes

Enabling Bandwidth Throttling

To support the platform’s Session Profile values for Download/Upload speed you must enable QoS Bandwidth Control for Individual Bandwidth Limit. To accomplish this follow these steps.

  • Login to your Pepwave MAX admin web interface
  • Click Advanced at the top and then Bandwidth Control to the left
  • Click the checkmark to Enable Individual Bandwidth Limit
  • Click Save
  • Use the Apply Changes at the top right to deploy the changes

Hardware-Dependent Features

Not all hardware can support every feature in the Marketing4WiFi platform. The following section describes features specific to a certain hardware, if these features are supported by this hardware and clarifies the available functionality. If you have questions about these features in the platform please reach out to support.

Disclaimer on hardware configuration guides in the KB:

This equipment has been integrated and tested in our labs with the Marketing4WiFi platform using the firmware versions below.

  • MAX Firmware 8.2.0. build 5167

LIMITED HARDWARE SUPPORT: Hardware manufacturers frequently make changes to firmware, controllers and GUI’s. The information below may be out of date or images may be different and is to be used as a general reference guide. We do offer additional limited support to help with trouble-shooting and we highly recommend that you have a hardware support agreement and/or access to a hardware support engineering representative from the manufacturer.

Updated on June 22, 2024
Was this article helpful?
Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT