Everest Basecamp Configuration Guide

You can confirm your environment under Operator Customizations.

Before configuring your device, please be sure that you have added the Gateway to the Smart WiFi Platform and associated it with a Hotspot.
ADD GATEWAY
ADD HOSPOT

The following instructions outline how to setup a Everest Networks Basecamp network for the Marketing4WiFi Platform.  This guide covers details such as configuring RADIUS, walled garden entries, and captive portals.  This guide assumes that your Basecamp controller is already operational and on a live network with adopted Access Points. Please make sure any firewall rules, web content filters, and other security measures have been configured to interface with the platform.

Log in to your Everest Basecamp controller.

      1. Click Wireless Networks, then in the top right click Add.
        1. Network Name: Smart WiFi
        2. SSID: (The name for your network)

          Please avoid special characters as they may impact Splash page presentation and authentication.

        3. Security: Open
        4. Captive Portal Enabled: Yes
        5. Splash URL: Select one
        6. Integrator: GoZone WiFi
        7. Advanced options-
          1. Client Isolation: Enabled
          2. Idle Timeout: 86399
          3. Session Timeout: 86400
      2. Primary Radius Authentication Server
        1. IP Address: Select one
        2. Port: 1812
        3. Shared Secret:Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
        4. Confirm Shared Secret: same as above
      3. Primary Radius Accounting Server
        1. IP Address: Select one
        2. Port: 1813
        3. Shared Secret:Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
        4. Confirm Shared Secret: same as above
      4. Secondary Radius Authentication Server
        1. IP Address: Select one
        2. Port: 1812
        3. Shared Secret:Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
        4. Confirm Shared Secret: same as above
      5. Secondary Radius Accounting Server
        1. IP Address: Select one
        2. Port: 1813
        3. Shared Secret:Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
        4. Confirm Shared Secret: same as above

         

      6. Save the network.
      7. Click Wireless Networks, then in the top right click Walled Garden.
        Please add all the Default walled garden entries.

        If you’re a white label client and you have your own splash domain, be sure to include it in the walled garden.

      8. Click Wireless Networks, then click the Smart WiFi network you just created, select the AP’s you wish to use with this configuration and then click Apply to APs.

Disclaimer on hardware configuration guides in the KB:

This equipment has been integrated and tested in our labs with the Marketing4WiFi platform using the firmware versions below.

BaseCamp Version: 3.0.0
Build: 36
AC Version: 3.0.0
AP Version: 3.0.0

LIMITED HARDWARE SUPPORT: Hardware manufacturers frequently make changes to firmware, controllers and GUI’s. The information below may be out of date or images may be different and is to be used as a general reference guide. We do offer additional limited support to help with trouble-shooting and we highly recommend that you have a hardware support agreement and/or access to a hardware support engineering representative from the manufacturer.

Updated on February 10, 2021

Was this article helpful?

Related Articles

Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT