1. Home
  2. Knowledge Base
  3. Supported Hardware
  4. Engenius
  5. Engenius Cloud Integration Guide
Searching...

Engenius Cloud Integration Guide

To avoid devices being presented a Hotspot Deactivated message, be sure that you have added your AP MACs as Gateways to the correct Hotspot in your Operator dashboard.
ADD GATEWAY
ADD HOSPOT

The following instructions outline how to setup a Engenius Cloud network for the Marketing 4 WiFi Platform.  This guide covers configuring RADIUS profiles and guest access settings. This guide assumes that your Engenius Cloud equipment is already operational and with a live network ready to configure for Guest WiFi. Please make sure any firewall rules, web content filters, and other security measures have been configured to interface with the platform.

  1. Login to your Engenius Cloud account
  2. Select the Network under the Organization you want to configure
  3. Using the navigation panel to the left, Open Configure > Access Point > SSID
  4. Press Add SSID (Or Edit your desired existing network)
    1. On the Wireless tab configure with
      • Name: Guest WiFi (or whatever you wish)
      • Enabled: ON
      • Type: Wireless
      • Security Type: Open
    2. On the Captive Portal tab configure with
      • Enabled: ON
      • Authentication Type: Custom RADIUS
      • Server 1 IP Address:
      • Server 1 Port: 1812
      • Server 1 Secret: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
      • Server 2 IP Address:
      • Server 2 Port: 1812
      • Server 2 Secret: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
      • NAS ID: Checked
      • NAS ID Value: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called SWS/Hotspot/NAS-ID.
      • Accounting Server: Checked
      • Server 1 IP Address:
      • Server 1 Port: 1813
      • Server 1 Secret: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
      • Server 2 IP Address:
      • Server 2 Port: 1813
      • Server 2 Secret: Available in the Edit Hotspot page in the Marketing4WiFi dashboard, called RADIUS Secret in the dashboard.
      • Bandwidth Limit by RADIUS: Checked
      • Redirect URL: Select “Redirect users to a specified URL after login” and configure with
      • Open Advanced settings and under the Walled Garden section, use the + button to add the Whitelist Entries one at a time. 
    3. On the Splash Page tab configure with
      • Splash Page Type: Select “External Splash Page URL” and configure with
  5. Press Apply
Updated on September 19, 2023

Was this article helpful?

Yes No
Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT